Forklift Inspections

Although forklifts are designed to perform rugged tasks, each use creates opportunity for damage. We perform a visual inspection of the general condition and an operational check to test proper functioning. If our qualified personnel notice anything that may affect normal operation, it will be noted in a written report issued on-site. All inspections meet or exceed the requirements of OSHA and ASME B56.1 & B56.6.

Inspection Program

• Fire extinguisher present and charged
• Engine oil level, fuel level, radiator water level (LPG, gas, and diesel forklifts)
• Battery securely in place
• Cables for exposed wires
• Hold-downs or brackets
• Bolts, nuts, guards, chains, or hydraulic hose reels — not damaged, missing, or loose
• Wheels and tires — not excessively worn or damaged
• Forks — not bent or cracked
• Positioning latches in good working condition
• Carriage teeth — not broken, chipped, or worn
• Chain anchor pins — not worn, loose, or bent
• No damp spots or drips that may indicate a leak
• Hoses held securely — not loose, crimped, worn, or rubbing
• Horn working and loud enough to be heard in the working environment; other warning devices operational
• Floor brake: pedal holds, unit stops smoothly
• Parking brake: holds against slight acceleration
• Dead-man seat brake: holds when operator rises from seat
• Clutch and gearshift: shifts smoothly with no jumping or jerking
• Dash control panel: all lights and gauges operational
• Steering: moves smoothly
• Lift mechanism: operates smoothly (checked by raising forks to maximum height then lowering completely)
• Tilt mechanism: moves smoothly and holds (checked by tilting mast all the way forward and backward)
• Cylinders and hoses: not leaking after above checks
• No unusual sounds

We also conduct a load test to verify the hydraulic system and confirm the unit will not drift under load.